1. INSTALL TRANSMISSION WIRE

(a) Coat the O-ring of the transmission wire connector with ATF.

(b) Install the transmission wire with the bolt. Torque: 5.4 N·m (55 kgf·cm, 48 in·lbf)

(c) Connect the transmission wire connector. HINT: Push up the lever until the claw of the transmission wire connector makes a connection sound.

2. CONNECT TRANSMISSION WIRE

(a) Connect the 7 connectors to the solenoid valves.

(b) Connect the 2 ATF temperature sensors with the 2 clamps and 2 bolts.

Torque: 10 N·m (102 kgf·cm, 7 ft·lbf)

Torque: 11 N·m (112 kgf·cm, 8 ft·lbf)

HINT:

Each bolt length is indicated below.

12 mm (0.472 in.) for bolt A

36 mm (1.41 in.) for bolt B

3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY

(a) Coat a new O-ring with ATF and install it to the oil strainer.

(b) Install the oil strainer with the 4 bolts. Torque: 10 N·m (102 kgf·cm, 7 ft·lbf)

4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

NOTICE:

Remove the gasket and be careful not to spill oil on the contacting surfaces of the transmission case and oil pan.

(a) Install a new gasket and the oil pan with the 20 bolts. Torque: 4.4 N·m (45 kgf·cm, 39 in·lbf)

6. ADJUST AUTOMATIC TRANSMISSION FLUID

7. INSPECT FOR AUTOMATIC TRANSMISSION FLUID LEAK